Me again. The guy with the NIC problem from before.
I installed the Rx590 and it shows up in lspci as an RTX 2070. I was hoping it was just Proxmox not having drivers or something, but when I pass it into the Hackintosh it’s meant for, it shows as NVIDIA there too:
Now I did get the Rx590 off eBay, but I’m it was listed as and looks like this: https://www.powercolor.com/product?id=1551768831
So I think it is actually a Rx590.
This is lspci. 01:00.0 is a RTX 3060. 03:00.0 is the Rx590.
00:00.0 Host bridge: Intel Corporation Device a740 (rev 01)
00:01.0 PCI bridge: Intel Corporation Device a70d (rev 01)
00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-S GT1 [UHD Graphics 770] (rev 04)
00:14.0 USB controller: Intel Corporation Alder Lake-S PCH USB 3.2 Gen 2x2 XHCI Controller (rev 11)
00:14.2 RAM memory: Intel Corporation Alder Lake-S PCH Shared SRAM (rev 11)
00:15.0 Serial bus controller: Intel Corporation Alder Lake-S PCH Serial IO I2C Controller #0 (rev 11)
00:16.0 Communication controller: Intel Corporation Alder Lake-S PCH HECI Controller #1 (rev 11)
00:17.0 SATA controller: Intel Corporation Alder Lake-S PCH SATA Controller [AHCI Mode] (rev 11)
00:1a.0 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #25 (rev 11)
00:1b.0 PCI bridge: Intel Corporation Device 7ac4 (rev 11)
00:1c.0 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #2 (rev 11)
00:1c.4 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #5 (rev 11)
00:1d.0 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #9 (rev 11)
00:1f.0 ISA bridge: Intel Corporation Z690 Chipset LPC/eSPI Controller (rev 11)
00:1f.3 Audio device: Intel Corporation Alder Lake-S HD Audio Controller (rev 11)
00:1f.4 SMBus: Intel Corporation Alder Lake-S PCH SMBus Controller (rev 11)
00:1f.5 Serial bus controller: Intel Corporation Alder Lake-S PCH SPI Controller (rev 11)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (17) I219-V (rev 11)
01:00.0 VGA compatible controller: NVIDIA Corporation GA106 [GeForce RTX 3060] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GA106 High Definition Audio Controller (rev a1)
02:00.0 Non-Volatile memory controller: Sandisk Corp Western Digital WD Black SN850X NVMe SSD (rev 01)
03:00.0 VGA compatible controller: NVIDIA Corporation TU106 [GeForce RTX 2070] (rev a1)
03:00.1 Audio device: NVIDIA Corporation TU106 High Definition Audio Controller (rev a1)
03:00.2 USB controller: NVIDIA Corporation TU106 USB 3.1 Host Controller (rev a1)
03:00.3 Serial bus controller: NVIDIA Corporation TU106 USB Type-C UCSI Controller (rev a1)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
05:00.0 Non-Volatile memory controller: Micron/Crucial Technology Device 5415 (rev 01)
06:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca)
07:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca)
Old AMD cards can be flashed with any BIOS that says anything. Maybe the card was used for a scam and flashed to say it’s an RTX 2070, it should have a switch to go to its 2nd BIOS near the top left (when slotted in). And if it doesn’t, you can just get its original BIOS off of Techpowerup’s database and flash it with atiflash, also from Techpowerup.
Picture stolen from some Reddit help thread for a red dragon RX 580.
This is assuming that Linux is reading what the card claims it is correctly. Which seems likely, since reading device IDs is a really important feature that probably works nearly perfectly.
Returning it is what OP should do. He paid for a working card, he should not be dealing with firmware flashing. Though I’d try using GPU-Z on a Windows machine to be sure first. Technically you can only be 100 % sure after reading the laser print from the GPU die but that might make returning harder so I wouldn’t bother.