It’s low power that is still making arm small computers popular. It’s impossible to get a pc down into the 2-5 Watt power consumption range and over time it’s the electrical costs that add up. I would suggest the RPI5 is the thing to get because it’s expensive for what it is and more performance is available from other options supported by armbian.

I use a 5600g on b450 ITX board and 4x 8GB Seagate drives and see about 35W idle and about 40W average. It used to be 45W because I was forced to use a GPU in addition to a 3600 to boot (even though its headless, just a bad bios setup that I can’t fix) and getting a CPU with graphics dropped my idle consumption quite a bit. I suspect the extra wattage for your machine is probably the bigger motherboard and the less efficient CPU.

It is possible to get the machine part down into single digits wattage and then about 5W a drive is the floor without spinning them down, so the minimum you could likely see with a much less powerful CPU is about 30-35W.

The thing is peertube wont grow unless the people aware of it start advertising and using it as an alternative. It takes collective investment in building the audience on an alternative for it to become viable.

Make sure none of the exceptions are ticked and the Minimum number of articles to keep per feed is also 25 or below. Then its up to the cron when that runs so you might have to manually purge it and optimise the database to see what it will actually keep.

I can’t say I have ever worried about it, been running FreshRSS for years and it seems to keep its database size in check fairly well and the defaults have worked fine for me and it rarely gets above 100MB. So I know it “loosely” works in that old articles are absolutely getting purged in time but have no idea how strictly it follows these rules.

Everyone has given Linux answers, its also worth knowing quite a lot of UEFI’s contain the ability to secure erase as well. There are a number of USB bootable disk management tools that can do secure erase as well.

The DMZ for the ISPs router forward to the second router, then everything that hits your outside IP will be forwarded to router 2. Then on Router 2 you open the ports for your service and forward to the internal machine. That should all work fine.

A few I have not mentioned yet

https://lwn.net/

https://linuximpact.com/

https://www.linuxserver.io/blog.atom

https://www.linuxuprising.com/

https://www.osnews.com/

Its quite complicated to setup as well, just went through the instructions and its a long way from just add to docker and run unfortunately. Would be nice to be able to just get a runner in the same or different docker and it just works easily without a lot of manual setup in Linux of directories and users and pipes etc.

I did the same move from contabo to Netcup. Contabo I had all sorts of weird bandwidth limiting problems that I couldn’t explain and which the continued to deny they were throttling. Netcup worked perfectly.

OpenWRT supports two devices for wifi 7 on filogic 880 at the moment in snapshot, the banana R4 with BE14000 wifi card add on, its a development board, and the Asus BT8. There are still plenty of issues but Wifi 7 is starting to come to OpenWRT and these MT7988 devices are going to be the major thing supported first.

The problem is the information asymmetry, there is always another person for a fraudulent company to exploit due to a dysfunctionally expensive court system. Its why we need market level regulations and public institutions that recover peoples money and fine the organisations for their breaches. This sort of thing works a lot better in the EU than in the US due to the sales laws, the ability to return within 2 weeks, default warranty on goods out to 12 months and expectations of goods to be as advertised forced onto the retailers. They work, they need more enforcement from regulatory bodies but retailers do follow them for the most part and quickly change tune when you go to take legal action when they don’t because courts know these laws inside and out.

Mine are only 25k hours or so, around 3 years. My prior set of disks had a single failure at 6 years but I replaced them all and went to bigger capacity. There is also the power saving aspect of going down to 2 drives as well, it definitely saves some power not spinning 4 extra drives all the time.

I sub to channels and use Youtubes recommendations and new for you to find additional channels etc but I don’t watch them I use Metube and a browser plugin and download the videos to a directory. I don’t get all the privacy but I also am not giving them much watch data and I can avoid the ads.

Universities have been running Linux since the very early versions. Slackware was pretty common back in the 90s and 2000s and universities had labs full of them not least because there weren’t really laptops so they had to have enough machines for all the students. Universities have been heavily involved in the development of unix from its inception and a lot of the tools were initially written by university professors.

I noticed today searching that the date search no longer seems to work right. There are some terms that only appeared since 2020 and up until my recent attempts those terms produced no results on DDG when date constrained but now produce terms in articles clearly after that date. I don’t know if this is some personalisation nonsense or always pulling but results if the constraints don’t match or what but its seriously problematic and means I can’t trust the date constraints anymore.

AMD has unfortunately a long history of abandoning products before its reasonable on its graphics division. Its not really acceptable, up until earlier this year my NAS/server was running a 3600 and its only for power saving purposes I changed that as its still a very workable CPU in that role.

They are going to get sued for billions and this little stunt isn’t going to change that. Should have implemented proper software testing before you took ever corporate computer in the world, but companies like this always force their developers to rush instead of do the right thing and when it bites them expect that things will carry on as normal. I can’t see many renewals in their future.

Either Intel is extremely incompetent and genuinely has no idea what is causing this problem or it knows full well is doing all it can to drag this out and avoid recalls. This saga has been going on all year now this is getting ridiculous.

It really depends on the project. Some of them take breaking changes seriously and don’t do them and auto migrate and others will throw them out on “minor” number releases and there might be a lot of breaking changes but you only run into one that impacts you occasionally. I typically don’t want containers that are going to be a lot of work to keep up to date so I jettison projects that have unreliable releases for whatever reason and if they put out a breaking change its a good time to re evaluate whether I want that container at all and look at alternatives.

So no its not safe, but depending on the project it actually can be.

Linux was in use on some university machines although I lot of them were still running Sun hardware OS. The main distribution I used at the time was Slackware.