First, a hardware question. I’m looking for a computer to use as a… router? Louis calls it a router but it’s a computer that is upstream of my whole network and has two ethernet ports. And suggestions on this? Ideal amount or RAM? Ideal processor/speed? I have fiber internet, 10 gbps up and 10 gbps down, so I’m willing to spend a little more on higher bandwidth components. I’m assuming I won’t need a GPU.
Anyways, has anyone had a chance to look at his guide? It’s accompanied by two youtube videos that are about 7 hours each.
I don’t expect to do everything in his guide. I’d like to be able to VPN into my home network and SSH into some of my projects, use Immich, check out Plex or similar, and set up a NAS. Maybe other stuff after that but those are my main interests.
Any advice/links for a beginner are more than welcome.
Edit: thanks for all the info, lots of good stuff here. OpenWRT seems to be the most frequently recommended thing here so I’m looking into that now. Unfortunately my current router/AP (Asus AX6600) is not supported. I was hoping to not have to replace it, it was kinda pricey, I got it when I upgraded to fiber since it can do 6.6gbps. I’m currently looking into devices I can put upstream of my current hardware but I might have to bite the bullet and replace it.
First, thanks everyone for all the info, glad I posted. It’s a lot to go through.
OpenWRT is the most frequently recommended thing here, and my router is not supported. I somewhat recently purchased my router (Asus AX6600) when I switched to fiber due to its high bandwidth and I’d prefer to not replace it. I’ll look around and see what options I have for putting a separate device upstream of my current hardware and if that doesn’t work out then maybe I’ll replace my current router.
I see that you can install openwrt on a switch. Would it make sense to put a switch with openwrt upstream of my current router/AP?
Edit: dang there’s only 1 switch supported by openwrt that has 10 gbps ports (ZyXEL XGS1250-12)
You can install OpenWRT on tons of hardware, or any generic PC. I’d suggest that over *sense distros any day because it’s just more user friendly.