• tempest@lemmy.ca
      link
      fedilink
      arrow-up
      5
      ·
      5 months ago

      Over the network can be hit or miss but the usb cable and the drivers from the AUR have yet to fail me

      • Estebiu@lemmy.dbzer0.com
        link
        fedilink
        arrow-up
        1
        ·
        5 months ago

        I have a ds640 (an usb scanner), and I’ve spent maybe 2 hours installing&reinstalling&removing drivers from the aur. Nothing worked. Installed Fedora just to see if things worked over there (as fedora is officially supported by brother) and things worked perfectly. Then i booted on my arch install arch once again, AND EVERYTHING WORKED. Alleluia. But I still don’t know why, as I didn’t touch nothing between last time i tried and now. Idk.

        • LeFantome@programming.dev
          link
          fedilink
          arrow-up
          1
          ·
          5 months ago

          Maybe just the reboot? Something was probably installed that was not started yet and it was started as part of the boot process?

    • f4f4f4f4f4f4f4f4@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      2
      ·
      5 months ago

      I can’t even get this Brother to scan to a flash drive in its own USB port. It acts like it’s successful; it scans and no errors show up… but the files just aren’t there. Tried multiple USB drives and made sure they were formatted to FAT32 in a sector size that Brother recommended in the manual.

      Printing to it from Debian was even easier than expected, though. Plug it in, it shows up as a networked printer, and you print to it.