They sound made up but convey the meaning well enough. “Talk about your experience with Bible-thumping peers”

Ive been using AirVPN since Mullvad dropped port forwarding and it has been decent and reasonably priced. The only issue I’ve had was with their “Eddie” client for Windows. I fixed this by using (I think, or something similarly named) WireSock with an AirVPN Wireguard config which also gave me the ability to do split tunneling easily but I only used this for a few months before building a new server running Proxmox

I think ProtonVPN also has the feature but costs a bit more. Private Internet Access is another cheap option but their owners are shady (I had them before Mullvad until they got sold to a company with ties to Israeli spyware makers IIRC)

You shouldn’t even be using Mullvad for torrenting as they had to get rid of their port forwarding feature some time ago. This means youll only be able to connect to individuals who do have port forwarding setup and no one else.

In any case the best solution is to link your torrent client to the VPN interface as it will cease operation if it loses connection and prevent leaks.

As someone with no PS experience or other baggage weighing me down, I find the default UI to be insanely unintuitive. Im not even sure what the panels on the right or bottom are for, the left toolbar panel randomly disappears on me occasionally and I can never figure out how to get it back without closing and reopening GIMP. Things like Crop don’t seem to do anything obvious. Painting with the brush doesn’t work unless you first use the selection tool to draw a box around the area you want to use the brush. Etc, etc, etc. Some of this is obviously just because I’m a novice, and I manage to fumble my way through things, but at the same time it could be drastically simplified for simple tasks. It feels like a tool that was built for people who already knew how to use it.

My guess is a low cost, thin cast iron pan

Fair enough but has anyone actually audited how secure Jellyfin is when exposed directly to the open internet? Not even the actual developers of the software recommend that, yet the majority of the replies here are being overly smug and cocky thinking it’s perfectly safe to do so.

Obvious troll account.

Note that opening a port gives full access to that port to the next higher Network. Opening a port directly to the Internet is therefore insecure and not recommended.

It says so right there.

There are multiple ways of exposing Jellyfin to the outside - the most common ones are:

forwarding its Ports directly to the internet (not recommended!)

forwarding through a Reverse Proxy

using a VPN connection to enter the Network

use a VPS to Reverse Proxy to your home network

And there.

This smug mentality that security is unnecessary when exposing ports to the open internet reminds me of people who think its fine to drive drunk because “I’ve done it dozens of times before and nothing happened!” It also reminds me of the mentality of tech company VPs right before they have a massive data breach. It’s quite absurd to read.

This seems like a naive viewpoint as you’re exposing your whole network and everything connected to it to the open internet. Just because the port connects to Jellyfin doesnt mean there isn’t some exploit or vulnerability that can allow for greater access. This is media software written by volunteers and offered for free, so I wouldn’t expect Fort Knox security from it just because its FOSS. In fact, they specifically put the onus on the user to do this themselves if they so chose.

Previously you could pay a one time fee to watch remotely on Android and iOS without having the Plex Pass and now it sounds like they’re rolling this into the Plex Pass and asking users to pay again.

Not necessarily the same drive but the same pool. I have a ZFS pool with 6 drives and can use hardlinks just fine.

Today I have a huge bottleneck in unpacking and moving. I’ve got 1gb fiber and can saturate it, getting a complete iso in just a few minutes, but then it’s another 30min plus waiting for that to actually be usable.

Are you doing this all manually or using the *arr suite? For me, this process takes a minute or two depending on the size of the files with Proxmox and ZFS but even previously on Windows 10 with SnapRAID it was quick.

Its honestly pretty small for what you can pack inside but they do have smaller options like the Node series. The 304 is around 8"x10"x14" with room for 6 drives.

The third alternative (and best IMO) is to buy a PC case with lots of drive slots and transfer everything into it. With a NAS you’re going to pay a ton of money for the NAS itself which is just laptop-equivalent hardware and a fixed number of drive bays meaning you can’t expand it when it fills up without buying more expensive hardware, and you’ll also be forced into buying matched drives. With an HDD enclosure, you’re spending less money but again fixed on the number of drives while also being somewhat unreliable due to the USB connection.

I use a Fractal Design Define 6 midtower case which can hold around 12 HDDs. For hardware I bought a mobo with the most SATA ports I could get and began slowly buying drives as my storage pool filled up, eventually needing an LSI HBA card to expand the number of SATA connections. This is the best value IMO as the cost is comparable to buying a NAS, you can add drives as you go with a much higher drive capacity, the connection is rock solid, and you can run real PC hardware.

It was definitely not fun stringing Cat6 through the attic, but knowing myself, I probably wouldn’t have stayed on top of battery changes and I also wanted 24/7 recording since a battery powered camera can miss movement and start recording late or not at all. I also need a doorbell camera still but I’ve had trouble finding one that checks all the boxes.

It sounds like a fun project but I dont know if I’d rely on it for security purposes. Plus with the cost of Pis now you might as well but a full fledged camera.

I have Amcrest PoE cameras hooked to an Amcrest NVR for 24/7 recording and also Frigate running separately tied to Home Assistant to record clips and send notifications when people are out front/back of my house. It all works really well thus far after about a year of use.

Ive had decent luck watching things stuck at 99.9% and having it work fine. Sometimes it’s just an .nfo file or the like thats missing.

Same. For me it’s not about the money but the service and experience. I wouldn’t mind buying a blu-ray and ripping it but I’m not going to subscribe to some service, log in, and use their app to watch a single show or movie because I find that whole process to be a chore.

Same. For most people in our space, a Dell Optiplex micro is more than enough horsepower (except few expansion ports). There’s no reason to be running a legacy server consuming 2.5kW just to host some movies or store your camera footage.