So I wanted to get myself a Kill-a-watt. Being who I am, I wanted information regarding its accuracy, especially at low power draws. I found a comparison with a industry grade equipment (Fluke is about the best out there in handheld electrical meters). It’s not encouraging, so I thought about a more proper meter, but it’s not easy to find an actual power meter that is accurate at low loads, isn’t a hassle to install and doesn’t cost an arm and a leg.
What do you use? Am I overthinking it?
Edit: thanks everyone for chiming in! To clarify a few things:
- I wasn’t (at least initially) looking for a permanent installation on my home server, but rather a good instrument to measure things around the house once I’m done fiddling with the server.
- the comparison with Fluke was just to illustrate what kind of error we can expect from a Kill-a-watt. It would be nice to have a Fluke power meter, but there’s nothing I do at home would even come close to justify it. The kill-a-watt is such an old design and the company behind it seems to focus on cheap trinkets. I was just hoping to find something a bit better than what P3 offers. Wouldn’t mind paying up to $75 for the same features and better accuracy.
- I looked for a multimeter that measured power somehow as I need a better one that can measure capacitance too anyway. Didn’t find it.
You must log in or # to comment.
Tasmota nous sametplugs work great and have a tiny footprint. They integrate nicely in home assistant. They must be calibrated once with a resistive load eg old light bulb.
Slight nitpick: Brymen handheld meters often have better specs in the handheld market, in particular when you are looking at a fixed price point.
You see a lot of Fluke meters around due to service agreement, as well as government and military contracts.
Don’t get me wrong, meters are fine, but there is no reason to spend that kinda money at home, unless the service manual of your washing machine explicitly states all measurements are to be done by a Fluke meter.
There was a youtube vid, testing multimeters, & there was a specific condition that produced wrong results in all the meters except Fluke, who had engineered to prevent that wrongness.
That was what decided me on trusting Fluke, in the future.
been years, no idea what channel it was on, sorry, but it should be findable for someone with patience, knowing that only the Fluke got it right, of the ones tested.
Do pay attention to the calibration-certificates, though:
Anybody paying for Fluke who ignores that their handhelds have no more than 2.5-digits of actual-accuracy, is foolish/incompetent.
( the cheap ones are sooo much worse… )